Start with the power cord, not the laptop
The HyperDrive Thunderbolt 4 Power Hub is unusual because its power supply is built in. There is no separate power brick to lose or find space for, only a slim AC cord. That changes the first step of setup: before you connect anything else, give the hub its own power.
Plug the AC cord into a wall outlet, then connect it to the hub. Because the GaN power source is integrated, the hub itself is the power supply. You do not need to attach an external adapter first. Once the hub has power, it is ready for the upstream connection to your laptop.
What the integrated GaN design changes
- HyperDrive Thunderbolt 4 Power Hub with Integrated GaN Power Source: The Thunderbolt 4 Power Hub has an integrated GaN power source and uses a slim AC cord instead of a large external power brick. This is why the hub can sit on a desk without a brick under it, and why the first setup step is simply the AC cord.

HyperDrive Thunderbolt 4 Power Hub with Integrated GaN Power Source
The order that avoids surprises
Follow this sequence so each connection has a stable base before you add the next one.
- 1. Power the hub: Connect the slim AC cord to the hub and a wall outlet. The hub is now powered by its integrated GaN source.
- 2. Connect your laptop to the upstream port: Use a Thunderbolt cable from your laptop to the hub’s upstream port. The upstream port provides passthrough charging of up to 96W, so this is also the connection that charges the laptop.
- 3. Add displays: The three downstream Thunderbolt 4 ports support dual 4K 60Hz or a single 8K 30Hz display. Connect your monitor or monitors to downstream ports, not the upstream port.
- 4. Add remaining devices: External drives, docks, and other Thunderbolt 4 devices can go into the remaining downstream ports. Each downstream port is rated for 15W charging.
Why the upstream port is not a device port
The upstream port is the link between the hub and your computer. It carries data both ways and sends up to 96W of passthrough charging to the laptop. Because of that role, it is not the place to plug in a monitor or an external drive. Those belong on the three downstream ports.
If you connect a display to the upstream port, it will not behave as a downstream display output. Keep the upstream connection reserved for the laptop.
Port capabilities to keep in mind
- HyperDrive Thunderbolt 4 Power Hub with Integrated GaN Power Source: Three Thunderbolt 4 downstream ports provide 40Gbps data transfers, 32Gbps PCIe data transfers, and dual 4K 60Hz or single 8K 30Hz display connectivity. These are the ports for your monitors, drives, and other peripherals after the laptop is connected upstream.
- HyperDrive Thunderbolt 4 Power Hub with Integrated GaN Power Source: The Thunderbolt 4 downstream ports are capable of 15W charging, and the upstream port provides passthrough charging of up to 96W. This separates the laptop charging path from the lower-power charging available to accessories on downstream ports.
A cleaner desk setup with fewer pieces
The integrated GaN power source is the main reason this hub simplifies a desk. Instead of a power brick and a separate hub, you have one unit and a slim cord. That leaves more room for a monitor, a keyboard, and the devices you actually use.
Place the hub where the AC cord can reach an outlet without strain, and where the upstream cable can reach your laptop comfortably. Because the hub is also the power source, it needs ventilation like any powered device, but the supplied information does not include specific clearance measurements. Use normal care and avoid enclosing it.
What the hub does not decide for you
Some setup details depend on your laptop and devices, not the hub. The supplied information does not confirm which specific laptop models are compatible, which Thunderbolt cables are required, or how to configure display settings. Check your laptop’s documentation for those details.
- Laptop compatibility: The hub is a Thunderbolt 4 device. Your laptop needs a compatible Thunderbolt port. The supplied information does not list specific supported models, so verify with your laptop maker.
- Cable requirements: Use a Thunderbolt cable for the upstream connection. The supplied information does not specify a particular cable length or brand.
- Display configuration: The hub supports dual 4K 60Hz or single 8K 30Hz, but the exact settings depend on your monitors and laptop. The supplied information does not include step-by-step display configuration.
When this hub fits your desk
The HyperDrive Thunderbolt 4 Power Hub is a good fit if you want one powered hub for a laptop, two 4K monitors, and a few Thunderbolt 4 accessories, and you prefer not to manage a separate power brick. It is less useful if your laptop lacks Thunderbolt 4, or if you need more than three downstream ports without adding another hub.
For a straightforward setup, power the hub first, connect the laptop upstream, then add displays and devices downstream. That order keeps the charging and data paths clear from the start.

